The FX Dynamic MKII 700 builds on the success of the Dynamic series of PCP air rifles and takes this platform to the next level.
Thanks to a stiffer aluminum fore-end and the updated Quick Set Trigger with three adjustable configurations, this version offers even greater precision and ease of use.

Accessory & Optic rail

The redesigned aluminum fore-end makes the rifle noticeably stiffer, resulting in consistent performance and optimal accuracy.
With an integrated Arca-Swiss rail, M-LOK mounting points, and space for balance weights on both the inside and outside, you can fully customize the setup to your preference.

The picatinny optic rail has a built-in 30 MOA incline.
This means your scope is mounted on an angle, allowing it to retain its adjustment range for longer distances.

Quick set Trigger

The innovative Quick Set Trigger (QST) gives you direct control over your trigger feel.
This trigger unit was immediately praised for its adjustability and ease of use after its debut in the FX Impact M4.
You can fine-tune it perfectly for PRS, hunting, or benchrest shooting.

Quick-tune system & AMP MK2 regulator

The FX Quick Tune System makes adjusting the hammer spring simple and intuitive. Combined with the externally adjustable AMP MKII regulator, the pressure in the large 163cc plenum can easily be set to the level required for your application.
This makes the FX Dynamic MKII extremely versatile and highly efficient.

STX Heavy liner

An essential feature of FX air rifles is the Smooth Twist X liner system.
This is the characteristic FX barrel system, where an internal liner inside the barrel can be changed to suit different purposes or types of ammunition.

The FX Dynamic MKII is equipped with the 700mm Smooth Twist X Superior Heavy liner.
This version features an adjusted choke and faster twist rate, optimized for use with heavy pellets and slugs.

At the end of the barrel you will find thread for mounting muzzle devices like muzzle breaks or moderators.
For the calibers .22 to .30 these threads will be 1/2x20 UNF. In .35 (9mm), the threads will be M18x1.