Is the pressure tube of your Hatsan leaking?
With this reseal kit you have all the o-rings and valve seat you need to freshen up the pressure tube of your air rifle!

Please note that these kits are only suitable for cylinders produced after 2013
You can find the production date printed on the side of the cylinder.

2-part kit

This set consists of two parts: all rings for the side with the valve, or the side with the pressure gauge.
If the pressure tube is not too old, you can choose to overhaul only the side with the defect.

Note: When placing the rings, we recommend lubricating them with silicone grease such as Hill NLGI Grease.
Not only good for these o-rings, but also for the maintenance of the running ring, rings of the filler pin, magazine, etc.!

This set is suitable for the following Hatsan models:

• BT65
• BT65SB
• BT65 Carnivore
• Galatian 1
• Galatian 2
• Galatian 3
• Galatian 4

Please note: These are the non-automatic models of the Galatian.
For the Galatian (4/5) Auto and Invader Auto you can use the BT65/Galatian reseal kit.