The BinTac T338 is a powerful PCP air rifle that can shoot semi-automatic.
This means that the T338 shoots the impressive 8.6mm pellets and slugs as quickly as you can pull the trigger.

Compact power

The most striking thing about the BinTac T338 is its compact design.
The T338 has a relatively short barrel (203mm) and also has a folding stock making the T338 as short as 42cm when folded!

But appearances can be deceiving! The small T338 shoots with a muzzle energy of 100 joules.
Combined with the 8-shot magazine, this semi-automatic powerhouse is very impressive!

For the BinTac T338, we recommend using the 66grains .338 AEA Center Punch pellets.

Complete package

The BinTac T338 comes with a sturdy TSA-approved case, 2 magazines and T338 also comes with the folding stock.
This is important to mention because the T338 was originally offered without the stock/adapter.

This stock is adjustable in length and has an adapter for a QD sling adapter.

Silencing the T338

Even with the shroud, the BinTac T338 has quite the bark.

It is possible to mount a suppressor on the T338 using this adapter by DonnyFL.
Please note that mounting a suppressor might cause the T338 to have cycling issues.
An oversized moderator/suppressor is recommended and the user will need to experiment with ammunition to see which combination cycles the best in his/her T338.

Filling the BinTac T338

The T338 comes with the fill probe to fill the rifle to the maximum of 300 bar.
This fill probe does not have the usual thread, but a male foster connection.
Your filling source therefore requires a female foster coupling.