The PP800R is a PCP pistol from the well-known Artemis/Snowpeak Airguns.
This airgun is equipped with a built-in regulator. This part ensures that the gun is consistent in its pressure/power, with precision as a result.
The barrel is threaded and comes with a silencer.
The PP800R Uses a self-indexing spring-loaded magazine.
This magazine can also be replaced by the supplied single-shot tray.
The gun is loaded through the bolt-action system located on the left side.
On top of the bolt housing is the rear-sight, which is adjustable in elevation and windage.
It can be removed from the gun, revealing the 11mm dovetail rail. This allows other optics such as a pistol scope or red dot.
Filling the Artemis PP800 is quite simple thanks to the supplied fill-probe.
You insert this into the hole of the pressure tube. There is a male foster connector on the end of the fill probe that you then connect to your fill source (which must have a female foster connector).
|Power source:||Pre compressed pneumatic (PCP)|
|Caliber:||4.5mm (.177) | 5.5mm (.22)|
|Muzzle energy:||8 | 12 joule|
|Fill pressure:||220 bar|
|Operating system:||Bolt action|
|Magazine:||9 | 7 shots|
|Max. projectile length:||10mm|
|Optic mounting:||11mm dovetail|
|Muzzle:||M10x1 threaded (silencer included)|
|Accessories:||Magazine, fill probe, single shot tray|