SHIPPING ACROSS EUROPE
LOW SHIPPING COSTS & FAST SHIPPING
A light, modular moderator with 5 chambers and a 1/2" UNF thread.
We ship across Europe.
We have a well-trained & certified staff
Low shipping costs & Fast ShippingManufacturer-backed Warranty & Support
| Article number: | RSV2-DRK |
| Availability: | In stock |
The Reservoir Mod by 3 Legged Thing is a compact, modular moderator for airguns.
This version has the Chamfered profile: a clean exterior with facets.
It is suitable for .177 and .22 and fits a barrel with a 1/2" UNF thread.
The moderator has 5 chambers, each with a compressed wool and polyester gasket.
The air behind the pellet expands further in every chamber and loses pressure.
By the last chamber there is little pressure left, so the shot is a lot quieter.
The pellet has already left the moderator before the air passes through the chambers, so the moderator does not touch its path.
Because the moderator is made of separate chambers, you can take it apart and clean it.
If you want a shorter moderator, you can remove chambers.
This does reduce the suppression.
The moderator is made of magnesium and weighs only 134 grams.
With a length of 14.5cm and a diameter of 36mm, your airgun stays well balanced.
Reservoir Mod with 5 chambers
5 wool and polyester gaskets
Threaded rear cap
Front cap
A light, slim moderator that you can adjust and maintain yourself.
A good choice if you want to make your airgun quieter without fitting a large moderator.
| Caliber: | .177-.22 |
| Thread: | 1/2x20 UNF |
| Length: | 14.5cm |
| Width: | 36mm |
| Weigth: | 134 grams |